SECS Electrical ☎ Call or text 0480 010 716
← Back to articles

I Already Bought an EV Charger. Can an Electrician Install It?

If you've already purchased an EV charger and want to know whether an electrician can install it for you, the short answer is usually yes — but there are a few things worth checking first.

So you've done your research, found a charger you like, bought it, and now you need someone to actually wire it up. Makes sense. The short answer is yes, a licensed electrician can generally install a charger you've already purchased — but there are a few practical things that need to be sorted before the job can go ahead. It's worth understanding what those are so there are no surprises on the day.

Yes, But the Charger Needs to Be Suitable

Not every EV charger sold in Australia is approved for installation here. Equipment used in Australian electrical installations needs to meet local regulatory requirements, which generally means it should carry appropriate certification or approval for use in Australia.

Some chargers bought overseas, imported through grey-market channels, or purchased from certain online marketplaces may not meet these requirements. A licensed electrician isn't able to legally install equipment that doesn't comply — and frankly, you wouldn't want them to. If you're unsure about what you've bought, it's worth checking with an electrician before you get too far down the track.

What the Electrician Will Need to Assess

Even if the charger itself is fine, the installation isn't just a matter of plugging something in. The electrician will need to look at your existing electrical supply, your switchboard, and the available capacity before anything gets connected.

A typical home EV charger draws a significant continuous load. Whether your existing setup can handle that without upgrading the supply, adding a new circuit, or modifying the switchboard depends entirely on what's already there. In rural areas around Goulburn, Yass, Gunning and the Southern Tablelands generally, single-phase supplies are common, older switchboards are common, and long cable runs to the meter or to a shed where someone wants to charge their vehicle are also common. All of these things affect how the job gets done and what it costs.

The electrician will want to know: what charger you've bought and what its electrical requirements are, where you want it installed, how far that is from your switchboard or meter, and what your existing supply looks like. If you can have that information ready, the conversation will be a lot more productive.

Single-Phase vs Three-Phase Chargers

This is one of the more common mismatches. Some EV chargers — particularly faster ones — are designed for three-phase power. If your property only has a single-phase supply, a three-phase charger either won't work properly or will need to be derated, depending on the unit. Some chargers handle this automatically; others don't.

If you've bought a three-phase charger and you're on a single-phase property, it's not necessarily a disaster, but it does need to be sorted out. The options include getting a three-phase supply connected (which involves your network distributor and is a separate process), using the charger in single-phase mode if it supports that, or in some cases, returning the charger and getting something more appropriate. An electrician can help you work out which path makes sense.

Hardwired vs Plug-In Chargers

Most proper home EV chargers are hardwired — they get connected directly to a dedicated circuit in your switchboard. This requires licensed electrical work regardless of who supplies the charger.

Some chargers are designed to plug into a standard power outlet or a higher-rated socket such as a 15-amp or 32-amp outlet. These still need the right outlet installed in the right place, which is also licensed electrical work. Don't be tempted to use an extension lead or an overloaded general-purpose outlet for EV charging. It's a fire risk and it's the kind of thing that voids insurance policies.

When You Definitely Need to Call an Electrician First

There are a few situations where it's worth having the conversation with an electrician before you buy anything, not after. If you're on a rural property with an older or unusual electrical setup, if you're planning to charge in a shed or outbuilding some distance from the main switchboard, or if you're not sure what your supply capacity is — get some advice first. It can save you buying equipment that doesn't suit the situation.

Similarly, if your switchboard is old, fuses rather than circuit breakers, or already running close to capacity, the charger installation may involve some additional work. That's not unusual and it's not a problem — it just needs to be factored in.

About SECS Electrical

SECS Electrical is based near Jerrawa and works across the Southern Tablelands including Dalton, Gunning, Yass, Goulburn and surrounding areas. EV charger installation is a regular part of the work — including on rural properties where the setup is a bit more involved than a standard suburban job.

The people at SECS come from industrial electrical, electronics, and automation backgrounds, so unusual setups and practical problem-solving are fairly normal territory. If you've already bought a charger and you're ready to get it installed, or if you want to talk through what's involved before you commit to a purchase, get in touch.

In Short

Buying your own EV charger before booking an electrician is perfectly reasonable — plenty of people do it. Just make sure the equipment is suitable for Australian installation, and be ready for the electrician to assess your existing setup before the work starts. The details of your property and supply will shape how the job gets done.

Let's talk about having SECS at your place.

Small job, EV charger, rural electrical or something completely odd.

☎ Call or text 0480 010 716