SECS Electrical ☎ Call or text 0480 010 716
← Back to articles

Do I Need Three Phase Power for an EV Charger?

Single phase or three phase — which do you actually need for an EV charger? This article explains the practical difference and helps you work out what suits your home, farm or workshop.

This is one of the most common questions we get from people thinking about installing an EV charger on their property. The short answer is: no, you don't always need three phase power. But the longer answer depends on what you're charging, how quickly you want to charge it, and what electrical supply you already have. Let's go through it properly.

The Short Answer

Most home EV chargers run perfectly well on a standard single phase 240V supply — the same supply that runs your house. A good quality single phase home charger will typically deliver somewhere between 7kW and 7.4kW of charge, which will fully charge most electric vehicles overnight without any trouble.

Three phase charging becomes relevant when you want faster charging speeds, you're running multiple vehicles, or you have a three phase supply already available and want to make use of it.

What Single Phase Charging Actually Means in Practice

A 7kW single phase charger will add roughly 40 to 50 kilometres of range per hour of charging, depending on the vehicle. For most people doing everyday driving — commuting, school runs, getting to town and back — plugging in overnight is more than enough. You leave the car on charge after dinner and wake up to a full battery.

The limitation of single phase charging only really becomes a problem if you're regularly arriving home with a flat battery and need a full charge in a hurry, or if you're charging a large battery vehicle and can't leave it charging for a long period.

When Three Phase Charging Makes Sense

Three phase EV chargers can deliver 11kW or even 22kW of charge, which significantly cuts down charging time. A 22kW three phase charger can do in a couple of hours what a single phase charger takes overnight.

Three phase charging is worth considering if you have multiple EVs to charge, if your vehicle supports three phase AC charging, if you run a business or farm with vehicles that need to be ready to go quickly, or if you already have a three phase supply to your property. Some workshops and rural properties around the Southern Tablelands already have three phase power for machinery, irrigation pumps or other equipment — in those cases, it often makes sense to put that supply to work for EV charging as well.

It's also worth knowing that not all electric vehicles can accept 22kW three phase charging. Many cap out at 7.4kW or 11kW regardless of what the charger can deliver. Check your vehicle's onboard charger specification before assuming a big three phase charger will give you a big speed advantage.

What If You Don't Have Three Phase?

Most homes — including the majority of houses and farm homesteads across areas like Yass, Gunning and Dalton — are connected on a single phase supply. That's absolutely fine for EV charging in most situations.

Getting three phase power connected to a property that doesn't already have it is possible but involves your local electricity distributor and can take time and money. It's not something to do lightly just for an EV charger unless there's a broader reason to upgrade the supply. In many cases, a single phase installation is the practical and cost-effective choice.

The Existing Switchboard and Electrical Supply Matter

Regardless of whether you go single or three phase, your existing switchboard and incoming supply need to be able to handle the additional load. An EV charger draws a sustained current — it's not like a kettle that's on for two minutes. A 7kW charger pulling around 32 amps continuously is a meaningful load on your electrical system.

Older switchboards with rewireable fuses or undersized mains cables may need attention before an EV charger can be safely installed. This is one of the reasons a proper site assessment by a licenced electrician matters — you need someone to look at what you've actually got before anything gets installed.

On rural properties, there's also the question of long supply runs. If your switchboard is a long way from where you want the charger — say, in a shed or workshop away from the house — cable sizing and voltage drop need to be calculated properly.

Charger Types: Hardwired vs Plug-in

Home EV chargers are generally either hardwired (permanently connected to your switchboard by a licenced electrician) or plugged into a suitable outlet. In Australia, hardwired dedicated chargers are the recommended approach for home and property installations — they're safer, neater, and allow the charger to be properly rated and protected.

Some people ask about just plugging their portable charger into a standard power point. That works at a lower charge rate and is fine for occasional use, but running a significant sustained load through a standard power point long-term is not ideal and the outlet should still be checked by an electrician to make sure it's suitable.

When to Get an Electrician Involved

Before you buy a charger, it's worth having an electrician look at your property. They can check your switchboard, confirm what supply you have, assess whether your mains are rated for the additional load, and advise on the best location for the charger and how to run the cable to it.

EV charger installation is licenced electrical work in NSW — it's not a DIY job. Beyond the legal requirement, getting it right means the installation is safe, the charger is properly protected, and you're not going to have problems down the track.

If you're on a rural property with an older installation, or if your shed or workshop is the intended location, there's a reasonable chance some preliminary work is needed before the charger itself goes in. Better to know that upfront.

SECS Electrical and EV Charger Installations

SECS Electrical installs EV chargers at homes, farms and workshops across the Southern Tablelands — from properties around Jerrawa and Goulburn through to Yass and beyond. We're familiar with the mix of older rural installations, long cable runs to sheds, and the practical questions that come up on country properties.

We'll assess your existing supply and switchboard, advise on the right charger setup for your situation, and handle the installation properly from start to finish. NSW Electrical Contractor Licence 199041C.

In Short

The bottom line: most EV chargers work fine on single phase power, and for everyday use at home or on a rural property, a single phase installation is usually the right call. Three phase is worth considering if you have the supply, need faster charging, or are running multiple vehicles. Either way, the first step is getting someone to look at what you've actually got — because the right answer depends on your specific setup.

Let's talk about having SECS at your place.

Small job, EV charger, rural electrical or something completely odd.

☎ Call or text 0480 010 716